FIRST STEPS

Kamera Hexacopter Typhoon H
Kamera Hexacopter Typhoon H
Kamera Hexacopter Typhoon H
Kamera Hexacopter Typhoon H Kamera Hexacopter Typhoon H Kamera Hexacopter Typhoon H Kamera Hexacopter Typhoon H Kamera Hexacopter Typhoon H

Getting started with your Typhoon H

 

STEP 1: OUT OF THE BOX

Unpack the box and you will see the following items: Typhoon H aircraft, CGO3+ camera (already connected on the aircraft) and the ST16 remote control. Unfold the arm until you hear a click.

STEP 2: REMOVE TAG STICKERS AND PROTECTIVE COVER

Carefully remove the protective cover on the camera, the protective sticker on the lens and the warnings from the motor arm. After those items are removed, insert the included SD card into the camera.

STEP 3: INSTALL THE PROPELLERS

Install propellers marked ‘A’ or ‘B’ on the corresponding rotors marked ‘A’ or ‘B’.

STEP 4: INSTALL THE AIRCRAFT BATTERY

Insert the battery into the battery slot with the YUNEEC logo facing upward. A click indicates the battery is properly installed.

STEP 5: POWER ON AND TAKE OFF

Place Typhoon H in an open area, free of obstructions, before taking off. Start the motors by holding the “Start/Stop Motors Button” on top of the ST16 Ground Station until the propellers start. Enjoy your flight!